How to remove previously connected Bluetooth devices from Logi Options+

How to remove previously connected Bluetooth devices from Logi Options+
To remove a connected Bluetooth device, select your operating system and then follow the instructions:

• MacOS
• Windows

If the inactive device appears in Logi Options+, see Remove an inactive device added in Logi Options+.

---

MacOS

1. Click on the Apple icon.
   
2. Click System Settings.
   
3. Click Bluetooth.
   
4. Select the device that you wish to delete and press the "i" on the right.
   
5. Click Disconnect.
   

---

Windows

1. On the Start menu, click the Settings (gear) icon.
   
2. Click Devices.
   
3. If the Bluetooth function is set to OFF, turn it ON. Your computer displays a list of saved Bluetooth devices.
4. Click on the device you want to unpair, and then click Remove device.
   
5. Click Yes.
   

---

Remove an inactive device added in Logi Options+

Common use case:
When a device is paired using Bluetooth, and then connected using a Logi Bolt receiver in the same computer, the user interface displays the previously connected device as well as the active device that was connected later, as shown:

To remove the inactive device:

1. Click on the Delete icon, which is inactive.
   
2. Click on Yes, Remove. This will remove the device if it’s connected using the Logi Bolt receiver. 
   If a Bluetooth connection is used, the Bluetooth screen will appear. Follow steps 4 and 5 in the previous section that corresponds to your operating system, Mac or Windows.