Remote Controls: Adding z-wave devices

This article applies to the following products:
890 Pro

This article applies to the Operating Systems:
Windows XP
Windows 2000
Windows ME
Windows 98SE

Additional Z-Wave lights must be added to the primary remote in the Z-Wave network setup portion of the remote control software.

To add additional Z-Wave devices:

1. Click Modify Settings on your home page.
2. Click Modify.
3. Select No when asked if you want to download Z-Wave network setup from the remote.
4. Click Modify beside the location you wish to add Z-Wave devices to.
5. Click Add Z-Wave Devices.
6. Once added, confirm the name you are giving the Z-Wave device. We recommend giving the Z-Wave device an intuitive name. For example, ?Bedroom Small Lamp?.
7. Click Save.
8. Click Lighting Setup.
9. Connect the primary remote to your computer.
10. Click Next
11. Once the remote control software has finished uploading the information to the remote, disconnect the remote from the USB cable
12. Follow the instructions on the LCD of the remote to pair the remote with your Z-Wave device. You will only need to pair with the new Z-Wave you added.
13. Once the Z-Wave device has been paired with your remote, return to your computer and connect the remote to your computer via the USB cable.
14. Click Next to upload the pairing information to the remote control software

Note: Once the pairing information has been uploaded, you can then create scenes that include your newly added Z-Wave device and finally map your scenes to an Activity.

How do I create a Scene?

How do I map a Scene to an Activity?