Working with FRITZ!Box

Make your appliances smart, using POP, FRITZ!Box, and FRITZ!DECT. For example, use FRITZ!DECT wall outlets to POP on your bedroom fan at bedtime. Double POP and your coffee starts brewing in the morning. Have it all. Things are simple when you use POP with FRITZ!Box.

---

Add FRITZ!Box & FRITZ!DECT

1. Ensure your POP bridge and FRITZ!DECT Switch are all on the same FRITZ!Box Wi‑Fi network.
2. Open the Logitech POP app on your mobile device and select MENU in the upper left-hand corner.
3. Tap MY DEVICES followed by + and then FRITZ!DECT.

 

---

Create a recipe

Now that your FRITZ!Box and FRITZ!DECT devices have been added, it’s time to set up a recipe that includes them:

1. From the home screen, select your button / switch.
2. Under your button / switch name, select the press configuration you would like to use (single, double, long).
3. Tap Advanced Mode if you'd like to set this device up using a trigger.
   (tapping Advanced Mode will also further explain this option)
4. Drag your FRITZ!DECT device(s) to the center area where it says DRAG DEVICES HERE.
5. If needed, tap the FRITZ!DECT device(s) you just added and set your preferences.
6. Tap ✓ in the upper right-hand corner to complete your POP button / switch recipe.

 

---

Technical Specifications

Required: FRITZ!Box with DECT.
Compatibility: FRITZ!DECT 200, FRITZ!DECT 210.
Notes: POP support is limited to one FRITZ!Box at a time.