Changing network connection type

During the Revue setup processes, you were instructed to connect your Revue to either an Ethernet or a Wireless network. After setup, to change the type of network your Revue is connected to, refer to appropriate section:

• Changing from Wireless to Ethernet
• Changing from Ethernet to Wireless

Changing from Wireless to Ethernet

1. Plug an Ethernet cable into the back of the Revue and into your router, switch, or hub.
2. From your Home bar, go to All Apps > Settings > Network.
3. Select Wi-Fi settings and the press OK key to turn off Wi-Fi. Your Revue will connect to your network using a wired, Ethernet connection

Changing from Ethernet to Wireless

1. From your Home bar, go to All Apps > Settings > Network.
   NOTE: When you turn on Wi-Fi in Revue, your Ethernet connection will be disabled.
2. Select Wi-Fi Settings.
3. Click on Wi-Fi to turn on Wi-Fi on your Revue.
4. Choose your wireless network.
5. Enter your network password (if required), and click Connect.

Your Revue will connect to your network using a wireless, Wi-Fi connection.