Your tablet keyboard has a single, multi-status LED. The LED blinks to communicate different states for the device:
After setting the tablet keyboard into the Typing or Media position:
| Color | Signal | Status | Action |
| Green | Single blink | Paired with iPad and connected to it | None |
| Red | Single blink | Connected with your iPad, but battery power is low | Charge when possible |
| Green | Blinking slowly | Searching for your iPad, but can't find it | Make sure Bluetooth is enabled on your iPad |
After setting the stand into position for the first time, or pressing and holding the Bluetooth button with the keyboard stand in position:
| Color | Signal | Status | Action |
| Green | Blinking quickly (3 blinks per second) | In pairing mode and can be connected to your iPad through Bluetooth | None |
| Red | Single blink, then quickly blinking green (3 blinks per second) | In pairing mode, but battery power is low | Charge when possible |
After pressing the battery-status button:
| Color | Signal | Status | Action |
| Green | Single blink | Has enough battery power to use | None |
| Red | Single blink | Can be used, but should be charged soon | Charge when possible |
| None | None | Isn't in Media or Typing position OR Batteries are either nearly or completely exhausted | Make sure the keyboard is properly placed in either Typing or Media position AND Charge when possible |
Important Notice: The Firmware Update Tool is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Preference Manager is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Control Center is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Connection Utility is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Unifying Software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The SetPoint software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Frequently Asked Questions
There are no products available for this section