Reference: LED behavior for Cordless Action Controller for PlayStation

This article applies to the following product:
Cordless Action Controller for PlayStation

This article applies to the following platforms:
PlayStation
PlayStation 2

The following list defines the behavior for the LEDs on the Cordless Action Controller for PlayStation

Receiver:

• Blinking quickly - The receiver is seeking any available controller. (Pressing the button on the receiver will force it into this mode.)
• Blinking slowly - The receiver is connected to inactive controller.
• Off - The receiver is connected to active controller. In this state the LED will glow when you press a button or move the joystick.

Gamepad:

• Blinking quickly - The gamepad is seeking a receiver.  The gamepad will go into sleep mode if it is not found within 12 seconds. Press a button to start the seek process again.
• Upon connection the LED stays on for 2 seconds - The gamepad is in analog mode.
• Upon connection the LED stays off for 2 seconds - The gamepad is in digital mode.
• Blinking slowly - The batteries are low.