This article applies to the following products:
Cordless Rumblepad 2
This article applies to the following platforms:
Windows XP / 2000 / Me / 98
Macintosh OS 9.x / OS X 10.2.8 - 10.5.x
The following table defines the meanings of the various LEDs on the Cordless Rumblepad 2:
| Receiver | |
| Blinking quickly | Receiver is seeking any available controller. Press the button on the receiver to force receiver into this mode. |
| Blinking slowly | Receiver is connected to inactive controller |
| Off | Recevier is connected to active controller. LED will glow when either a button is pressed or the joystick is moved while in this mode. |
| Gamepad | |
| Blinking quickly | Gamepad is seeking receiver. Gamepad will go into sleep mode in twelve seconds if receiver is not found. Press any button to restart seek process. |
| LED stays on for 2 seconds (upon connection) | Gamepad is in flight mode |
| LED stays off for two seconds (upon connection) | Gamepad is in sport mode |
| Blionking slowly | Batteries are low |
Important Notice: The Firmware Update Tool is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Preference Manager is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Control Center is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Connection Utility is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Unifying Software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The SetPoint software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Frequently Asked Questions
There are no products available for this section
There are no Downloads for this Product
There are no Downloads for this Version
Compatible Product
